Adding An Option To A Device's Shortcut Menu - Brocade Communications Systems Brocade 8/12c User Manual

Adding an option to a device's shortcut menu

You can add an option to a device's shortcut menu.
To add an option to the device's shortcut menu, complete the following steps.
1. Select Tools > Setup.
2. Click the Product Menu tab.
3. Type or select the text in the Menu Text list as you want it to appear on the menu.
4. Choose one of the following options:
5. Select the appropriate type in the Condition 1 Property name list.
6. Enter the appropriate value for the selected property in the Condition 1 Value field.
7.
8. Select the tool that you want to launch from the Tool list, or click Define to add a tool.
9. Select the Append device ID check box to specify the parameter used when opening the tool.
10. Click Add to add the new menu item.
11. Click OK to save your work and close the Setup Tools dialog box.
Brocade Network Advisor SAN User Manual
53-1002167-01
The Setup Tools dialog box displays.
The Product Popup Menu Items table displays all configured shortcut menu options.
-
To display the menu option only for devices that meet the conditions listed, select the
Match Conditions option.
-
To display the menu option on the shortcut menus for all devices, select the All option.
If you select All, skip to
(Optional) Select the Condition 2 Property type and enter the Value for that property type
(Condition 1 AND Condition 2 must be true) to define a second condition to be simultaneously
true.
NOTE
To set up a condition where Condition 1 OR Condition 2 must be true, define two menu items,
one for each condition.
To specify a new tool, refer to
-
To specify that the device's IP address should be used when opening the tool, select the IP
Address option.
-
To specify that the device's Node WWN should be used when opening the tool, select the
Node WWN option.
It displays in the Product Popup Menu Items table.
NOTE
You must click Add before clicking OK; otherwise, your changes will be lost.
Adding an option to a device's shortcut menu
step 8. Otherwise, continue to
"Adding a tool" on page 203.
step 5.
8
207