22
Adding thresholds
Editing a Link Reset threshold
NOTE
This threshold is only available for Fabric OS devices.
To edit a Link Reset threshold, complete the following steps.
1. Select Monitor > Fabric Watch > Port Fencing.
2. Select Link Reset (Fabric OS only) from the Violation Type list.
3. Select the threshold you want to change and click Edit.
4. Change the name for the threshold in the Name field, if necessary.
5. Select one of the following options:
6. Change the number of port events allowed for the threshold in the Threshold field, if
7.
8. Click OK on the Edit Link Reset Threshold dialog box.
9. Click OK on the Port Fencing dialog box.
698
The Port Fencing dialog box displays.
The Edit Link Reset Threshold dialog box displays.
FIGURE 320
Edit Link Reset Threshold dialog box
•
Default—Uses device defaults. Go to
•
Custom—Uses your selections. Continue with
necessary.
Change the time period for the threshold from the errors per list, if necessary.
If the threshold has already been assigned to ports, an "Are you sure you want to make the
requested changes to this threshold on "X" ports?" message displays. Click OK to close.
To assign this threshold to fabrics, switches, or switch ports, refer to
page 693.
step
8.
step
6.
Brocade Network Advisor IP User Manual
"Assigning thresholds"
on
53-1002168-01