18
Smart card usage
FIGURE 156
3. Click Register from Archive.
FIGURE 157
4. Select a card from the table, then click OK.
5. Wait for the confirmation dialog box indicating initialization is done, then click OK.
Deregistering an authentication card
Authentication cards can be removed from the database and the switch by deregistering them. Use
the following procedure to deregister an authentication card.
1. Select Configure > Encryption from the menu task bar.
2. Select an encryption group from the Encryption Center Devices table, then select Group >
434
Encryption Group Properties dialog box - Security tab
The Authentication Cards dialog box displays
that are in the database.
Authentication Cards dialog box - registering smart cards from archive
The card is added to the Registered Authentication Cards table in the Encryption Group
Properties dialog box.
(Figure
The Encryption Center dialog box displays
Security from the menu task bar, or right-click an encryption group and select Security.
The Encryption Group Properties dialog box displays, with the Security tab selected
(Figure
154).
(Figure
157). The dialog box lists the smart cards
154.)
(Figure
153).
Brocade Network Advisor SAN User Manual
53-1002167-01