Brocade Communications Systems Brocade 8/12c User Manual page 374

13
Adapter port WWN virtualization
5. Enter a valid world wide name (WWN), with or without colons, for the Access Gateway node.
6. Enter a port or a port range using numbers or a hyphen (-). For example, you can enter a range
7.
8. Set the fabric assigned WWN type to one of the following map types:
9. Click OK to add the rows for this configuration to the Fabric Assigned WWN Configuration - AG
Deleting AG port FAWWNs
1. Select Configure > Fabric Assigned WWN.
2. Click the Attached AG Ports tab.
3. Select an online AG Fabric Assigned WWN row and click the Delete button.
Moving an AG port 's FAWWN across switches
The AG port FAWWN can be online or offline when moved across switches.
1. Select Configure > Fabric Assigned WWN.
2. Click the Attached AG Ports tab.
330
FIGURE 114
Add AG Fabric Assigned WWN Configuration dialog box
Optionally, you can select an existing AG Node WWN from the list. The AG Node WWN combo
box includes all discovered AG Node WWNs that are connected to the selected switch.
as 1-6 or you can separate values with a comma; for example: 1, 2, 5, 7-10, 20.
Click the Enable checkbox to enable the Fabric Assigned WWN.
•
Auto—If the switch port does not have an Auto FAWWN map type and the FAWWN feature is
not yet enabled on the port, a <To Be Generated> message displays.
•
User defined—If this option is selected, you must enter a valid world wide name, with or
without colons. The User defined text box cannot be empty.
Ports list.
or
Right-click the switch and select Fabric Assigned WWN.
The Configure Fabric Assigned WWNs dialog box displays.
The AG FAWWN row is cleared from the Fabric Assigned WWN Configuration - AG Ports list.
or
Right-click the switch and select Fabric Assigned WWN.
The Configure Fabric Assigned WWNs dialog box displays.
Brocade Network Advisor SAN User Manual
53-1002167-01