Supported Devices For Multi-Service Ironware R02.7.02A; Feature Support; Supported Features - Brocade Communications Systems PowerConnect B-RX Release Note

Supported devices for Multi-Service IronWare R02.7.02a

This software release applies to the following Brocade products:
BigIron RX-4 Switch
•
BigIron RX-8 Switch
•
BigIron RX-16 Switch
•
BigIron RX-32 Switch
•
Note: The software release described in these release notes can only be used on the devices specified
above.
All information required to operate the BigIron RX Series Switch is described in the BigIron RX Series
Configuration Guide or the Brocade BigIron RX Series Installation Guide.

Feature support

Below is a list of all the features supported on the BigIron RX switches. See Unsupported features, for
features not supported.

Supported features

Category
System level Features

Cisco Discovery Protocol (CDP)

CLI Logging

Denial of Service (DoS)
protection

Foundry Discovery Protocol
(FDP)

High Availability
IronWare Software Release 02.7.02a for Brocade BigIron RX Series Swtches
Release Notes v 1.0
Feature description
Allows you to configure a Brocade device to intercept and display the
contents of CDP packets. This feature is useful for learning device
and interface information for Cisco devices in the network.
Protection from SYN attacks
Protection from Smurf attacks
Enables Foundry devices to advertise themselves to other Foundry
devices on the network.
OS Layer 2 Hitless Software Upgrade
Page 5 of 46