Finding Zones In A Zone Configuration; Finding A Zone Configuration Member In The Zones List - Brocade Communications Systems Brocade 8/12c User Manual

19
Zoning administration
4. Select the zone member in the Zones list that you want to find in the Potential Members list.
5. Click Find < between the Potential Members list and the Zones list.

Finding zones in a zone configuration

Use this procedure to locate all instances of a zone in the Zone Configurations list on the Zone DB
tab.
1. Select Configure > Zoning > Fabric.
2. Click the Zone DB tab if that tab is not automatically displayed.
3. Select an FC fabric from the Zoning Scope list.
4. Select the zone you want to find in the Zones list.
5. Click Find > between the Zones list and the Zone Configurations list.

Finding a zone configuration member in the zones list

Use this procedure to locate a zone configuration member in the Zones list on the Zone DB tab.
1. Select Configure > Zoning > Fabric.
2. Click the Zone DB tab if that tab is not automatically displayed.
3. Select an FC fabric from the Zoning Scope list.
4. Select the zone configuration member (i.e., the zone) in the Zone Configurations list that you
622
Press SHIFT or CTRL and click each zone to select more than one zone.
•
If the member is found, it is highlighted in the Potential Members list.
•
If the member is not found, a message displays informing you of this. Click OK to close the
message box.
•
If there are no ports listed in the Potential Members list, a message displays informing you
that additional action is required. Right-click within the list panel and select Port Display
from the shortcut menu to display ports.
The Zoning dialog box displays.
This identifies the target entity for all subsequent zoning actions and displays the zoning
database for the selected entity.
Press SHIFT or CTRL and click each zone to select more than one zone.
•
If the zone is found, all instances of the zone are highlighted in the Zone Configurations
list.
•
If the zone is not found, a message displays informing you of this. Click OK to close the
message box.
The Zoning dialog box displays.
This identifies the target entity for all subsequent zoning actions and displays the zoning
database for the selected entity.
want to find in the Zones list.
Press SHIFT or CTRL and click each zone to select more than one zone.
Brocade Network Advisor SAN User Manual
53-1002167-01