14
FCoE login groups
Disabling the FCoE login management feature on a switch
1. Select Configure > FCoE from the menu bar.
2. Select an FCoE-enabled switch from the Login Groups list and click Disable.
3. Review the changes carefully before you accept them.
4. Click Start to apply the changes, or click Close to abort the operation.
•
Enabling the FCoE login management feature on a switch
1. Select Configure > FCoE from the menu bar.
2. Select an FCoE-disabled switch from the Login Groups list and click Enable.
3. The FCoE Login Group Configuration and Status dialog box displays.
4. Review the changes carefully before you accept them.
5. Click Start to apply the changes, or click Close to abort the operation.
384
or
Right-click the DCB device and select FCoE.
The FCoE Configuration dialog box displays.
The FCoE Login Group Confirmation and Status dialog displays.
The FCoE login management feature is disabled and all login groups on the selected switch are
deleted.
The value in the FCoE Login Management State column for the selected switch is Disabled and
no login groups appear under the switch after the FCoE Configuration dialog box refresh
operation.
"FCoE login groups"
or
Right-click the DCB device and select FCoE.
The FCoE Configuration dialog box displays.
The FCoE login management feature is enabled on the selected switch.
The value in the FCoE Login Management State column is Enabled after the FCoE
Configuration dialog box refresh operation.
Brocade Network Advisor SAN User Manual
53-1002167-01