Brocade Communications Systems Brocade 8/12c User Manual page 572

18
Adding target disk LUNs for encryption
•
•
•
528
The New LUN option is used only if an RKM key vault is configured for the encryption group.
The New LUN option can be used only if replication is enabled for the encryption group.
If the local LUN contains host data, configuring it with the New LUN option will cause the data
on the last three blocks of the LUN to be lost. Before using the New LUN option, you must
migrate the contents of the LUN to another LUN that is larger by at least three blocks. The new,
larger LUN can then be used when creating the SRDF pair. The remote LUN of the SRDF pair
must be of the same size. The original smaller LUN with user data can be decommissioned.
Brocade Network Advisor SAN User Manual
53-1002167-01