Brocade Communications Systems Brocade 8/12c User Manual page 544

18
Creating a new encryption group
7.
8. Enter the passphrase, which is required for restoring the master key. The passphrase can be
9. Re-enter the passphrase for verification.
10. Click Next.
FIGURE 209
11. Set quorum size and system card requirements.
12. Click Next.
500
Enter the name of the file used for backing up the master key, or browse to the desired
location.
between eight and 40 characters, and any character is allowed.
The Select Security Settings dialog box displays
Select Security Settings dialog box
The quorum size is the minimum number of cards necessary to enable the card holders to
perform the security sensitive operations listed above. The maximum quorum size is five cards.
The actual number of authentication cards registered is always more than the quorum size, so
if you set the quorum size to five, for example, you will need to register at least six cards in the
subsequent steps.
Setting quorum size to a value greater than zero and/or setting system cards to Required
launches additional wizard dialog boxes.
The Confirm Configuration dialog box displays
encryption group name and switch public key certificate file name you specified.
(Figure 209).
(Figure 210). The dialog box displays the
Brocade Network Advisor SAN User Manual
53-1002167-01