Editing An Invalid Words Threshold - Brocade Communications Systems Brocade 8/12c User Manual

22
Adding thresholds
4. Change the name for the threshold in the Name field, if necessary.
5. Select one of the following options:
6. Change the number of port events allowed for the threshold in the Threshold field, if
7.
8. Click OK on the Edit Invalid CRCs Threshold dialog box.
9. Click OK on the Port Fencing dialog box.

Editing an Invalid Words threshold

NOTE
This threshold is only available for Fabric OS devices.
To edit an Invalid Words threshold, complete the following steps.
1. Select Monitor > Fabric Watch > Port Fencing.
2. Select Invalid Words (Fabric OS only) from the Violation Type list.
3. Select the threshold you want to change and click Edit.
4. Change the name for the threshold in the Name field, if necessary.
5. Select one of the following options:
6. Change the number of port events allowed for the threshold in the Threshold field, if
7.
696
•
Default—Uses device defaults. Go to
•
Custom—Uses your selections. Continue with
necessary.
Change the time period for the threshold from the errors per list, if necessary.
If the threshold has already been assigned to ports, an "Are you sure you want to make the
requested changes to this threshold on "X" ports?" message displays. Click OK to close.
To assign this threshold to fabrics, switches, or switch ports, refer to
page 693.
The Port Fencing dialog box displays.
The Edit Invalid Words Threshold dialog box displays.
FIGURE 318
Edit Invalid Words Threshold dialog box
•
Default—Uses device defaults. Go to
•
Custom—Uses your selections. Continue with
necessary.
Change the time period for the threshold from the errors per list, if necessary.
step 8.
step 6.
step 8.
step 6.
Brocade Network Advisor IP User Manual
"Assigning thresholds" on
53-1002168-01