Editing An Invalid Crcs Threshold - Brocade Communications Systems Brocade 8/12c User Manual

4. Change the name for the threshold in the Name field, if necessary.
5. Select one of the following options:
6. Change the number of discarded frames allowed for the threshold in the Threshold field, if
7.
8. Click OK on the Edit C3 Discard Frames Threshold dialog box.
9. Click OK on the Port Fencing dialog box.

Editing an Invalid CRCs threshold

NOTE
This threshold is only available for Fabric OS devices.
To edit an Invalid CRCs threshold, complete the following steps.
1. Select Monitor > Fabric Watch > Port Fencing.
2. Select Invalid CRCs (Fabric OS only) from the Violation Type list.
3. Select the threshold you want to change and click Edit.
Brocade Network Advisor IP User Manual
53-1002168-01
FIGURE 316
Edit C3 Discard Frames Threshold dialog box
•
Default—Uses device defaults. Go to
•
Custom—Uses your selections. Continue with
necessary.
Change the time period for the threshold from the errors per list, if necessary.
If the threshold has already been assigned to ports, an "Are you sure you want to make the
requested changes to this threshold on "X" ports?" message displays. Click OK to close.
To assign this threshold to fabrics, switches, or switch ports, refer to
page 693.
The Port Fencing dialog box displays.
The Edit Invalid CRCs Threshold dialog box displays.
FIGURE 317
Edit Invalid CRCs Threshold dialog box
Adding thresholds
step 8.
step 6.
22
"Assigning thresholds" on
695