Launching The Smia Configuration Tool On Unix - Brocade Communications Systems Brocade 8/12c User Manual

3. Enter your username and password in the appropriate fields.
4. Select or clear the Save password check box to choose whether you want the application to
5. Click Login.

Launching the SMIA configuration tool on Unix

NOTE
All Management application services must be running before you can log into the SMIA
Configuration Tool. To start the Management application services, click Start on the Server
Management Console dialog box.
Perform the following steps to launch the Server Management Console on Unix systems.
1. On the Management application server, go to the following directory:
2. Type the following at the command line:
3. Click Configure SMI Agent on the Server Management Console dialog box.
Brocade Network Advisor SAN User Manual
53-1002167-01
The defaults are Administrator and password, respectively. If you migrated from a previous
release, your username and password do not change.
remember your password the next time you log in.
The SMIA Configuration Tool dialog box displays.
FIGURE 86
SMIA Configuration Tool dialog box
Install_Directory/bin
./smc
OR
sh smc
The Login dialog box displays.
SMI Agent configuration
9
231