Driver repository
You can access the Driver Repository dialog box from the Adapter Software dialog box. Initially, the
repository is empty. You must import files into the repository. Imported driver files are then
displayed in the Available Driver Files list in the Driver Repository dialog box.
Importing a driver into the repository
To import drivers into the Management application, perform the following tasks.
1. From the Adapter Software dialog box, click the Repository button.
2. Click Import on the Driver Repository dialog box.
3. Locate the driver file using one of the following methods:
4. Click Open.
5. Click OK.
Brocade Network Advisor SAN User Manual
53-1002167-01
The Driver Repository dialog box, shown in
FIGURE 108
Driver Repository dialog box
The Import Driver Repository dialog box displays.
•
Search for the file you want from the Look In list.
•
Enter the name of the image file you want to import in the File Name field.
After the import completes successfully, you see a message that the boot image imported
successfully.
Adapter software
Figure
108, displays.
13
315