Configuring Storage Arrays; Remote Replication Luns - Brocade Communications Systems Brocade 8/12c User Manual

FIGURE 237
12. Click OK or Apply to apply the changes, or click OK to commit the transaction.

Configuring Storage Arrays

The Storage Array contains a list of storage ports that will be used later in the LUN centric view. You
must assign storage ports from the same storage array for multi-path I/O purposes. On the LUN
centric view, storage ports in the same storage array are used to get the associated CryptoTarget
containers and initiators from the database. Storage ports that are not assigned to any storage
array but are within the fabrics of the encryption group will be listed as a single target port on the
LUN centric view. Storage Arrays are configured using the Storage Port Mapping dialog box. You will
need to:
•
•
For more detailed information on creating a crypto target container, refer to the chapter describing
storage arrays in this administrator's guide.

Remote replication LUNs

The Symmetrix Remote Data Facility (SRDF) transmits data that is being written to both a local
Symmetrix array and a remote symmetrix array. The replicated data facilitates a fast switchover to
the remote site for data recovery.
Brocade Network Advisor SAN User Manual
53-1002167-01
Correcting an Encryption Mode Mismatch
When you correct a policy on a LUN, it is automatically selected for all paths to the selected
LUN. When you modify LUN policies, a Modify icon displays to identify the modified LUN entry.
Configure target and zone initiator ports in the same zone in order for the target container to
come online and discover LUNs in the storage system.
Create CryptoTarget containers for each target port in the storage array from the Target
Container dialog box. Add initiator ports to the container. You must create target containers for
those target ports in the configured storage arrays or unassigned target ports before mapping
any LUN on the LUN centric view. If you do not create the container, LUN discovery will not
function.
Adding target disk LUNs for encryption
18
525