Brocade Communications Systems Brocade 8/12c User Manual page 582

18
Tape LUN statistics
2. Select a group, switch, or engine from the Encryption Center Devices table that contains the
FIGURE 248
3. Select the container of type Tape for which to display or clear statistics.
4. Click Statistics.
FIGURE 249
5. To clear the tape LUN statistics for member LUNs in the container, click Clear.
6. When prompted with a confirmation dialog box, click Yes.
7.
538
storage device to be configured, then select Group/Switch/Engine > Targets from the menu
task bar, or right-click a group, switch, or engine and select Targets.
NOTE
You can also select a group, switch, or engine from the Encryption Center Devices table, then
click the Targets icon.
The Encryption Targets dialog box displays
target containers.
Encryption Targets dialog box
The Tape LUN Statistics dialog box displays
all LUNs that are members of the selected tape container.
Tape LUN Statistics dialog box
To update the tape LUN statistics, click Refresh.
(Figure 248). The dialog box lists configured crypto
(Figure 249). The dialog box lists the statistics for
Brocade Network Advisor SAN User Manual
53-1002167-01