Adding A Policy Monitor - Brocade Communications Systems Brocade 8/12c User Manual

29

Adding a policy monitor

3. Click Close on the Policy Monitor dialog box.
Adding a policy monitor
To view existing policy monitors, complete the following steps.
1. Select Monitor > Policy Monitor.
2. Click Add .
3. Enter a user-defined name for the policy in the Name field.
4. Enter a description of the policy in the Description field.
5. Click the Schedule Use check box.
828
•
Next Run—The time the policy will run again.
•
Last Run—The time the policy ran last.
•
Result—The result of last Policy Monitor run. There are three possible results: Success,
Partially Failed, Failed, and Not Applicable.
The Policy Monitor dialog box displays.
The Add Monitor dialog box displays.
FIGURE 362 Add Policy Monitor dialog box, Fabric Checks tab
The name does not have to be unique. It cannot be over 64 characters or empty. It cannot
include asterisks.
The description cannot be over 128 characters. It cannot include asterisks.
Brocade Network Advisor SAN User Manual
53-1002167-01