Brocade Communications Systems Brocade 8/12c User Manual page 57

•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Connectivity Map
The Connectivity Map, which displays in the upper right area of the main widow, is a grouped map
that shows physical and logical connectivity of SAN components, including discovered and
monitored devices and connections. These components display as icons in the Connectivity Map.
For a list of icons that display in the Connectivity Map, refer to the following tables:
•
•
•
Brocade Network Advisor SAN User Manual
53-1002167-01
Domain ID. Displays the Domain ID for the product in the format xx(yy), where xx is the
normalized value and yy is the actual value on the wire.
FC Address. Displays the Fibre Channel address of the port.
Firmware. Displays the firmware version of the product.
IP Address. Displays the IP address (IPv4 or IPv6 format) of the product.
Location. Displays the physical location of the product. This field is editable at the fabric level.
Model. Displays the model number of the product.
Name. Displays the name of the product or port. This field is editable at the fabric, device, and
port level.
Port #. Displays the number of the port.
Port Count. Displays the number of ports on the product.
Port Type. Displays the type of port (for example, expansion port, node port, or NL_port).
Protocol. Displays the protocol for the port.
Serial #. Displays the serial number of the product.
Speed Configured (Gbps). Displays the actual speed of the port in Gigabits per second.
State. Displays the state for the product and the port.
Status. Displays the status for the product and the port.
Symbolic Name. Displays the symbolic name for the port.
TAG. Displays the tag number of the product.
Vendor. Displays the name of the product's vendor.
WWN. Displays the world wide name of the product or port.
Zone Alias. Displays the zone alias of the product or port.
"SAN product icons" on page 17
"SAN group icons" on page 19
"Event icons" on page 21
User interface components
1
13