30
SNMP traps
The SNMP Trap Forwarding dialog box allows you to perform the following tasks:
•
•
•
•
Adding a trap destination
The Add Trap Destination dialog box allows you to configure destinations for forwarding SNMP
traps.
1. Select Monitor > SNMP Setup > Trap Forwarding.
2. Click the Enable trap forwarding check box.
3. Click Add in the SNMP Trap Forwarding dialog box.
852
FIGURE 373
SNMP Trap Forwarding dialog box
Add a trap destination.
Edit a selected trap destination.
Duplicate a selected trap destination.
Delete a selected trap destination.
The SNMP Trap Forwarding dialog box, shown in
The Add Trap Destination dialog box, shown in
Figure
373, displays.
Figure
374, displays.
Brocade Network Advisor SAN User Manual
53-1002167-01