Removing a trap recipient from one or more switches
1. Select Monitor > SNMP Setup > Product Trap Recipients.
2. Click Remove from the Action list.
3. Enter the IP address of the SNMP trap port (the recipient server) in the Recipient IP Address
4. Select the fabric or switches from the Available list.
5. Click OK.
SNMP trap forwarding
The SNMP Trap Forwarding dialog box allows the Management application to forward received
SNMP traps to product trap recipients.
You can use the SNMP Trap Forwarding feature to set up filters to determine which traps will be
forwarded. The filters can be one of the following:
•
•
•
•
Perform the following steps to forward SNMP traps.
Select Monitor > SNMP Setup > Trap Forwarding.
The SNMP Trap Forwarding dialog box, shown in
Brocade Network Advisor SAN User Manual
53-1002167-01
The SNMP Trap Recipients dialog box, shown in
field.
NOTE
For IP products, only switches are available to select.
The Management application removes the recipient from the managed switches.
Severity of the trap
Available products type
Trap type
Message types (application messages or pseudo events)
Figure
372, displays.
Figure
373, displays.
30
SNMP traps
851