30
Event action definitions
Configuring event action policies
The Policy pane of the Add Event Action dialog box, shown in
frequency of the event, enter a message for an event that will be displayed in the event log, and
specify the event severity.
1. Click Act on all occurrences (default) if you want the action to be triggered each time the
2. Click Act as specified if you want the action to be triggered only when the occurrence of the
3. Click If occurs at least __ times in __minutes if you want the action to be applied only if the
872
FIGURE 388
Policy pane of the Event Action dialog box
selected events occur.
event meets the specified criteria.
event occurs at a certain frequency. Then specify the frequency by selecting one of the
following options:
-
Click Frequency bound (act as count reaches the count specified) if you want the
Management application to perform the specified action once the specified number of
occurrences has occurred during the specified duration. For example, if you want the
action to be applied when 10 link down traps occur during a one-minute interval, then the
specified action will be applied as soon as 10 link down traps occur, even though the one-
minute duration has not elapsed.
Figure
388, allows you to define the
Brocade Network Advisor SAN User Manual
53-1002167-01