Deleting A Policy Monitor; Running A Policy Monitor - Brocade Communications Systems Brocade 8/12c User Manual

29

Deleting a policy monitor

Deleting a policy monitor
To delete an existing policy monitor, complete the following steps.
1. Select Monitor > Policy Monitor.
2. Select the policy you want to delete in the Monitors table.
3. Click Delete.
4. Click Yes on the confirmation message.
5. Click Close on the Policy Monitor dialog box.

Running a policy monitor

Before you run a policy monitor, make sure your policy monitors are valid. Valid policy monitors
must have at least one policy selected with one or more targets. Management checks do not
require a target.
To run an existing policy monitor, complete the following steps.
1. Select Monitor > Policy Monitor.
2. Select the policy you want to run in the Monitors table.
3. Click Run.
836
The Policy Monitor dialog box displays.
The Policy Monitor dialog box displays.
When the policy monitor check is complete, the Policy_Name - Policy Monitor Report displays
in a web browser.
FIGURE 367
Policy Monitor Report
Brocade Network Advisor SAN User Manual
53-1002167-01