Brocade Communications Systems Brocade 8/12c User Manual page 285

Brocade network advisor san user manual v11.1x (53-1002167-01, may 2011)

Hide thumbs Also See for Brocade 8/12c:

Table of Contents

4. Click Apply.

5. Click Close to close the SMIA Configuration Tool dialog box.

Configuring the Bind Network Address

You must have SAN - SMI Operation Read and Write privileges to view or make changes on the

To configure the network bind address, complete the following steps.

1. Click the CIMOM tab.

2. Select a network address from the IP Configuration Bind Network Address list to which you

3. Click Apply.

4. Click Close to close the SMIA Configuration Tool dialog box.

Brocade Network Advisor SAN User Manual

53-1002167-01

Changes on this tab take effect after the next CIMOM server restart.

You can only restart the server using the Server Management Console (Start > Programs >

Management_Application_Name 11.X.X > Server Management Console).

If you disabled SSL, a confirmation message displays. Click Yes to continue.

want to bind the CIMOM server.

The default network address is the host system name.

Changes on this tab take effect after the next CIMOM server restart.

You can only restart the server using the Server Management Console (Start > Programs >

Management_Application_Name 11.X.X > Server Management Console).

SMI Agent configuration

Chapters

Table of Contents