Vm Manager; Adding A Vm Manager - Brocade Communications Systems Brocade 8/12c User Manual

3. Select the WWN row you want to move by right-clicking it, select the Copy Row option, and
4. Select an online AG FAWWN row and click the Delete button.
5. Select a switch from the Switch list and click Add to launch the Add AG Fabric Assigned WWN
6. Using the information you copied to the text editor, configure the AG port WWN information to
7.

VM Manager

A vCenter server can be discovered by adding a VM Manager tor to the Management application.
See

Adding a VM Manager

1. Click Add on the Discover VM Managers dialog box.
2. Enter the IP address or host name of the VM Manager (VMM) into the Network Address text
3. Enter the VMM server port number into the Port text box. The valid port number range is 0
4. Enter the user ID into the User ID text box to identify the user of the VMM. The maximum
5. Enter the password into the Password text box. The maximum number of supported characters
Brocade Network Advisor SAN User Manual
53-1002167-01
paste the contents into a text editor.
Configuration dialog box.
be moved to the selected switch.
Click OK.
The specified AG FAWWN row is added to the new switch.
"VM Manager Discovery"
The Add VM Manager dialog box displays.
FIGURE 115
Add VM Manager dialog box
box. The maximum number of supported characters is 256.
through 65536.
number of supported characters is 64.
is 64.
on page 75 for information about discovering VM Managers.
13

VM Manager

331