Creating a traffic class map
1. Select Configure > DCB from the menu bar.
2. Select a switch, and click Edit.
3. Click the QoS tab on the Edit Switch dialog box.
4. Select Traffic Class from the Map Type list.
5. Name the Traffic Class map.
6. Click the Traffic Class cell in a CoS row and directly enter a value from 0-7. You can leave the
7.
8. When you have finished the configuration, click OK to launch the Deploy to Products dialog
Editing a traffic class map
1. Select Configure > DCB from the menu bar.
2. Select a switch, and click Edit.
3. Click the QoS tab on the Edit Switch dialog box.
4. Select a Traffic Class Map from the Traffic Class Maps table, and click the left arrow button to
5. Keep the same Traffic Class Map name and modify the values, as required.
6. Click the right arrow button to re-add the map to the Traffic Class Maps table.
7.
Brocade Network Advisor SAN User Manual
53-1002167-01
The DCB Configuration dialog box displays, showing the status of all DCB-related hardware and
functions.
The QoS dialog box displays.
cell empty to indicate zero (0).
Click the right arrow button to add the map to the Traffic Class Maps table.
If the name of the Traffic Class map already exists, an overwrite warning message displays.
Click Yes to overwrite the existing Traffic Class map.
box, shown in
Figure
134.
The DCB Configuration dialog box displays, showing the status of all DCB-related hardware and
functions.
The QoS dialog box displays.
load its values to the left pane. The fields are now editable.
If the name of the Traffic Class map already exists, an overwrite warning message displays.
Click Yes to overwrite the existing Traffic Class map.
When you have finished the configuration, click OK to launch the Deploy to Products dialog
box, shown in
Figure
134.
14
QoS configuration
357