Cimom Configuration - Brocade Communications Systems Brocade 8/12c User Manual

1. Click the Authentication tab.
2. Choose from one of the following options:
3. Click Apply.
4. Click Close to close the SMIA Configuration Tool dialog box.

CIMOM configuration

NOTE
You must have SAN - SMI Operation Read and Write privileges to view or make changes on the
CIMOM tab.
The CIMOM tab enables you to configure the CIMOM server port, the Bind Network Address, and
the CIMOM log.
Brocade Network Advisor SAN User Manual
53-1002167-01
•
Select No Authentication to allow the CIM client to query the CIMOM server without
providing credentials; however, note that the CIMOM server requires the Management
application credentials to connect to the Management application server to retrieve the
required data. To provide Management application credentials, complete the following
steps.
a. Enter the Management application user name in the Username field.
b. Enter the Management application user password in the Password field.
•
Select Management_Application Authentication to allow the CIM client to query the
CIMOM server and the Management application server using the credentials configured
on the Users tab.
NOTE
Changes on this tab take effect after the next CIMOM server restart.
NOTE
You can only restart the server using the Server Management Console (Start > Programs >
Management_Application_Name 11.X.X > Server Management Console).
SMI Agent configuration
9
239