Brocade Communications Systems Brocade 8/12c User Manual page 160

Brocade network advisor san user manual v11.1x (53-1002167-01, may 2011)
Hide thumbs Also See for Brocade 8/12c:
Table of Contents

Advertisement

4
Software Configuration
3. Choose one of the following options in the Server IP Configuration list.
4. Select the return IP address in the Client - Server IP Configuration Return Address list.
5. Select the preferred IP address in the Switch - Server IP Configuration Preferred Address list.
6. Click Apply or OK to save your work.
7.
Configuring an explicit server IP address
If you selected a specific IP address from the Server IP Configuration screen during installation and
the selected IP address changes, you will not be able to connect to the server. To connect to the
new IP address, you must manually update the IP address information.
To change the IP address, complete the following steps.
1. Choose one of the following options:
2. Click Next on the Welcome screen.
3. Click Yes on the confirmation message.
4. Click Next on the FTP Server screen.
116
Select All. Go to
step
Select a specific IP address. Continue with
Select localhost. Continue with
When Server IP Configuration is set to All, you can select any available IP address as the
Return Address. If you select a specific IP address, the Return Address list shows the same IP
address and you cannot change it.
If DNS is not configured for your network, do not select the 'hostname' option from either the
Return Address or Preferred Address list. Selecting the 'hostname' option prevents clients and
devices from communicating with the Server.
NOTE
Changes to this option take effect after an application restart.
NOTE
You can only restart the server using the Server Management Console (Start > Programs >
Management_Application_Name 11.X.X > Server Management Console).
Click OK on the "changes take effect after application restart" message.
On Windows systems, select Start > Programs > Management_Application 11.X.X >
Management_Application Configuration.
On UNIX systems, execute sh Install_Home/bin/configwizard in terminal.
4.
step
step
5.
5.
Brocade Network Advisor SAN User Manual
53-1002167-01

Advertisement

Table of Contents
loading

This manual is also suitable for:

Network advisor 11.1.xBrocade bladesystem 4/24

Table of Contents