Brocade Communications Systems Brocade 8/12c User Manual page 114

3
Host discovery
3. Enter a discovery request name (such as, MyFabric) in the Discovery Request Name field.
4. Select Hosts in Fabrics from the list.
5. Select All fabrics or an individual fabric from the list.
6. Click Add.
7.
8. Click OK on the Add Host Adapters dialog box.
9. Click Close on the Discover Host Adapters dialog box.
70
FIGURE 28
Add Host Adapters dialog box
All hosts which are part of a managed fabric and have a registered host name display in the
list. If no host with a registered host name exists, an error message displays. Click OK to close
the error message.
Configure Host credentials, if necessary.
a. Enter the HCM Agent port number in the Port field.
b. Enter your username in the User ID field.
c. Enter your password Password field.
If an error occurs, a message displays. Click OK to close the error message and fix the problem.
A Host Group displays in Discovered Hosts table with pending status. To update the status from
pending you must close and reopen the Discover Host Adapters dialog box.
Brocade Network Advisor SAN User Manual
53-1002167-01