Brocade Communications Systems Brocade 8/12c User Manual page 279

SLP on UNIX systems
This section describes how to verify the SLP daemon on UNIX systems.
SLP file locations on UNIX systems
•
•
•
Verifying SLP service installation and operation on UNIX systems
1. Open a command window.
2. Type % su root and press Enter to become the root user.
3. Type # Install_Home/cimom/bin/slptool findsrvs service:service-agent and press Enter to
4. Type # Install_Home/cimom/bin/slptool findsrvs service:wbem and press Enter to verify the
5. Choose one of the following options to verify the SLP service is advertising the WBEM SLP
SLP on Windows systems
This section describes how to verify the SLP daemon on Windows systems.
SLP file locations on Windows systems
•
•
•
Brocade Network Advisor SAN User Manual
53-1002167-01
SLP log—Install_Home/cimom /cfg/slp.log
SLP daemon—Install_Home/cimom /cfg/slp.conf
You can reconfigure the SLP daemon by modifying this file.
SLP register—Install_Home/cimom /cfg/slp.reg
You can statically register an application that does not dynamically register with SLP using
SLPAPIs by modifying this file. For more information about these files, read the comments
contained in them, or refer to http://www.openslp.org/doc/html/UsersGuide/index.html.
verify the SLP service is running as a Service Agent (SA).
SLP service is advertising its WBEM services.
template over its configured client protocol adapters.
•
Type # Install_Home/cimom /bin/slptool findattrs service:wbem:http://IP_Address:Port
and press Enter.
•
Type # Install_Home/cimom /bin/slptool findattrs service:wbem:https://IP_Address:Port
and press Enter.
NOTE
Where IP_Address:Port is the IP address and port number that display when you use the
slptool findsrvs service:wbem command.
SLP log—Install_Home\cimom \cfg\slp.log
SLP daemon—Install_Home\cimom\cfg\slp.conf
You can reconfigure the SLP daemon by modifying this file.
SLP register—Install_Home\cimom\cfg\slp.reg
You can statically register an application that does not dynamically register with SLP using
SLPAPIs by modifying this file. For more information about these files, read the comments
contained in them, or refer to http://www.openslp.org/doc/html/UsersGuide/index.html.
SMI Agent configuration
9
235