Printing San Reports; Deleting San Reports - Brocade Communications Systems Brocade 8/12c User Manual

32

Printing SAN reports

Printing SAN reports
You can print reports through an internet browser.
1. Select Reports > View.
2. Select the report you want to print in the left pane of the dialog box.
3. Click Show in Browser.
4. Select File > Print (in the Web browser).
5. Select the printer to which you want to print and click Print.
6. Close the Web browser.
7.
8. Click Yes on the "are you sure you want to close" message.

Deleting SAN reports

To delete reports, complete the following steps.
1. Select Reports > View or click the View Report icon.
2. Select the report you want to delete in the All Reports list.
3. Click Delete Report.
4. Click Close to close the View Reports dialog box.
5. Click Yes on the "are you sure you want to close" message.
926
The View Reports dialog box displays.
If you do not see the report you want to view, generate it first by following the instructions in
"Generating SAN reports"
NOTE
Hyperlinks in reports are active only as long as the source data is available.
The selected report displays in your default Web browser.
The Print dialog box displays.
Click Close in the View Reports dialog box.
The View Reports dialog box displays.
If you do not see the report you want to view, generate it first by following the instructions in
"Generating SAN reports"
You can select reports by Time, Report Type, or User.
ATTENTION
Once you click Delete Report, the report is deleted without confirmation.
on page 924.
on page 924.
Brocade Network Advisor SAN User Manual
53-1002167-01