Brocade Communications Systems Brocade 8/12c User Manual page 67

TABLE 4
Professional edition ports (Continued)
Port Number Ports
24602 jboss.connector.bisocket.port - port 2
24603 jboss.connector.bisocket.secondary.port
- port 3
24604 jboss.naming.rmi.port - port 4
24605 jboss.jrmp.invoker.port - port 5
24606 jboss.pooled.invoker.port - port 6
24607 jboss.connector.socket.port - port 7
24608 jboss.web.ajp.port - port 8
24609 jboss.web.service.port – port 9
24610 connector.bind.port – port 10
1 Port is not configurable (either in the switch or the Management server).
2 Every FTP session requires an additional port which is randomly picked. If the firewall is enabled then FTP operation (used for firmware
download, technical support, firmware import (from client-server) and so on.) will fail.
3 Ports configurable in the switch and the Management server. Port must be the same for all switches managed by the Management
server.
4 Ports used to launch the Web Tools application for Fabric OS switches from the Management client. This is applicable only when the
Fabric OS version is earlier than 6.1.1.
5 Port 80 is the default web server port number. If you set the web server port number to a port other than the default, you must open that
port in the firewall.
6 The Syslog listening port is configurable in the Management server. The switch always sends syslog messages to port 514. If you have
any other syslog daemon on the Management server machine already listening to 514, then the Management Server can be configured
to listen to a different port. You must manually configure relay in existing syslogd to forward the syslog messages to the Management
Server listening on the configured port.
7 The Management server tries to find a contiguous block of 13 ports from the starting port configured (for example, 24600); if any port in
this range is not available for the Management application, then you must provide a new starting port. Note that Port 1 to Port 12 in
"Ports" column of the table above are not separately configurable and those ports vary based on the starting port number configuration
(specified as Port 0 in the above table). The port numbers mentioned in the table above are the default ports (for example, when 24600
is selected as the starting port number).
TABLE 5 Trial and Licensed version ports
Port Number Ports
1
20 FTP Port (Control)
1, 2
21 FTP Port (Data)
1
22 SSH or Secure Telnet
1
23 Telnet
25 SMTP Server port
Brocade Network Advisor SAN User Manual
53-1002167-01
Transport Description
TCP Bisocket connector port
TCP Bisocket connector secondary
port
TCP RMI naming service port
TCP RMI/JRMP invoker port
TCP Pooled invoker port
TCP Socket invoker port
TCP AJP 1.3 connector port
TCP Web service port
TCP Port to listen for requests on
Transport Description
TCP FTP Control port for internal
FTP server
TCP FTP Data port for internal
FTP server
TCP Sectelnet port from server to
switch/client to switch
TCP Telnet port from server/client
to switch
TCP SMTP Server port for E-mail
communication
Management server and client
Communication Path Open in Firewall
Client–Server
Client–Server
Client–Server
Client–Server
Client–Server
Server
Server
Server
Server
Communication Path Open in Firewall
Client–Server
Switch–Server
Client–Server
Switch–Server
Server–Switch
Client–Switch
Server–Switch
Client–Switch
Server–SMTP
Server
1
No
No
No
No
No
No
No
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
23