Brocade Communications Systems Brocade 8/12c User Manual page 562

18
Adding encryption targets
NOTE
If you can view the VI/VT Port WWNs and VI/VT Node WWNs, the container has been successfully
added to the switch.
FIGURE 229
11. Review any post-configuration instructions or messages, which you can copy to a clipboard or
12. Click Next.
518
Configuration Status dialog box
print for later.
The Next Steps dialog box displays
certificates for the encryption switch are displayed. These instructions are specific to the key
vault type.
(Figure 230). Instructions for installing public key
Brocade Network Advisor SAN User Manual
53-1002167-01