Viewing Zone Configuration Properties; Adding Zones To A Zone Configuration - Brocade Communications Systems Brocade 8/12c User Manual

7.
8. Click OK or Apply to save your changes.

Viewing zone configuration properties

1. Select Configure > Zoning > Fabric.
2. Click the Zone DB tab if that tab is not automatically displayed.
3. Select an FC fabric from the Potential Members list.
4. Right-click the zone configuration you want to review in the Zone Configurations list and select
5. Review the zone configuration properties.
6. Click OK to close the Zone Configuration Properties dialog box.

Adding zones to a zone configuration

1. Select Configure > Zoning > Fabric.
2. Click the Zone DB tab if that tab is not automatically displayed.
3. Select an FC fabric from the Zoning Scope list.
4. Select one or more zone configurations to which you want to add zones in the Zone
Brocade Network Advisor SAN User Manual
53-1002167-01
Add zones to the zone configuration.
For step-by-step instructions, refer to
A message displays informing you that any zones or zone configurations you have changed will
be saved in the zone database, and warning you to make sure no other user is making changes
to the same areas.
The Zoning dialog box displays.
This identifies the target entity for all subsequent zoning actions and displays the zoning library
for the selected entity.
Properties.
The Zone Configuration Properties dialog box displays.
The following information is included in the zone properties:
•
Zone Configuration Name—The name of the selected zone configuration.
•
Number of Zones—The number of zones in the selected zone configuration.
•
Total Zone Members—The total number of zone members in the selected zone
configuration.
•
Number of Unique Zone Members—The total number of zone members that are unique in
the zone configuration.
•
Status—The status of the selected zone configuration (active or not active).
The Zoning dialog box displays.
This identifies the target entity for all subsequent zoning actions and displays the zoning
database for the selected entity.
Configurations list. (Press SHIFT or CTRL and click each zone configuration name to select
more than one zone configuration.)
Zoning configuration
"Adding zones to a zone configuration"
19
on page 593.
593