10
Configuration repository management
Restoring a configuration from the repository
If you delete a fabric or switch from discovery, the configuration remains in the repository until you
delete it manually. Stored configurations are linked to the switch WWN; therefore, if the IP address
or switch name is changed and then rediscovered, the Switch Configuration Repository dialog box
displays the new switch name and IP address for the old configuration.
NOTE
This feature requires a Trial or Licensed version.
1. Right-click a device in the Product List or the Connectivity Map, and select Configuration >
2. Select the configuration you want to restore, and click Restore.
254
Configuration Repository.
The Switch Configuration Repository dialog box displays.
FIGURE 94
Switch Configuration Repository
The configuration is downloaded to the device. If necessary, the restoration process prompts
you to disable and reboot the device before the configuration begins. This lets you determine
whether the configuration backup should be performed immediately or at a later time.
If you confirm the restoration, the entire configuration is restored; you cannot perform selective
download for specific configuration sections.
Brocade Network Advisor SAN User Manual
53-1002167-01