Establishing Tems Key Vault Credentials On The Switch; Signing The Brocade Encryption Node Kac Csr On Tems - Brocade Communications Systems Brocade 8/12c User Manual

9. Enter a password in the Password and Verify Password fields.
10. Select the group brocade from the group pull-down menu.
11. Click Add Client.

Establishing TEMS key vault credentials on the switch

The credentials established for the TEMS client must be presented to TEMS by the switch.
1. From the Encryption Center Devices table, select a switch, then select Switch > Key Vault
FIGURE 172
2. Copy the user name and password used when creating the TEMS client.
3. Click OK.

Signing the Brocade encryption node KAC CSR on TEMS

The KAC certificate signing request (KAC CSR) generated when the encryption node is initialized
must be exported for each encryption node and signed by the local CA on TEMS. The signed
certificate must then be imported back into the encryption node.
1. From the Encryption Center, select Switch > Export Certificate.
2. Select Public Key Certificate Request (CSR) and click OK.
3. Log in to the Thales management program.
Brocade Network Advisor SAN User Manual
53-1002167-01
A TEMS client user is created and is listed in the table.
Credentials from the menu task bar, or right-click a switch and select Key Vault Credentials.
The Key Vault Credentials dialog box displays
Key Vault Credentials dialog box
You may create different credentials, but if you do, you must change the TEMS client
credentials to match the new credentials.
The Export Switch Certificate dialog box displays.
A dialog box displays that allows you to save the CSR to your SAN Management Program client
PC.
Alternatively, you may select Switch > Properties, and click the Export button beside the Public
Key Certificate Request, or you make copy the CSR for pasting in the From Text box on the
Thales management program Sign Certificate Request page.
Steps for connecting to a TEMS appliance
(Figure 172).
18
467