Brocade Communications Systems Brocade 8/12c User Manual page 606

18
Viewing and editing switch encryption properties
•
•
•
•
•
•
•
•
•
•
562
Switch Status - the health status of the switch. Possible values are Healthy, Marginal, Down,
Unknown, Unmonitored, and Unreachable.
Switch Membership Status - the alert or informational message description which details the
health status of the switch. Possible values are Group Member, Leader-Member Comm, Error,
Discovering, and Not a member.
Encryption Group - the name of the encryption group to which the switch belongs.
Encryption Group Status - Possible values are:
-
OK - Converged - the group leader can communicate with all members.
-
Degraded - the group leader cannot communicate with one or more members.
-
Unknown - the group leader is in an unmanaged fabric.
NOTE
When a group is in the Degraded state, the following operations are not allowed: key vault
changes, master key operations, enable/disable encryption engines, Failback mode changes,
HA Cluster creation or addition (removal is allowed), tape pool changes, and any configuration
changes for storage targets, hosts, and LUNs.
Fabric - the name of the fabric to which the switch belongs.
Domain ID - the domain ID of the selected switch.
Firmware Version - the current encryption firmware on the switch.
Primary Key Vault Link Key Status - the possible statuses are as follows:
-
Not Used – the key vault type is not LKM.
-
No Link Key – no access request has been sent to an LKM, or a previous request was not
accepted.
-
Waiting for LKM approval – a request has been sent to LKM and is waiting for the LKM
administrator's approval.
-
Waiting for local approval – a response was received from LKM.
-
Created, not validated – in interim state until first used.
-
Link Key valid, online – (LKM only) a shared link key exists and has been successfully
used.
Primary Key Vault Connection Status - whether the primary key vault link is connected. Possible
values are Unknown, Key Vault Not Configured, No Response, Failed authentication, and
Connected.
Backup Key Vault Link Key Status - the possible statuses are as follows:
-
Not Used – the key vault type is not LKM.
-
No Link Key – no access request has been sent to an LKM, or a previous request was not
accepted.
-
Waiting for LKM approval – a request has been sent to LKM and is waiting for the LKM
administrator's approval.
-
Waiting for local approval – a response was received from LKM.
-
Created, not validated – in interim state until first used.
-
Link Key valid, online – (LKM only) a shared link key exists and has been successfully
used.
Brocade Network Advisor SAN User Manual
53-1002167-01