Support Mode Settings - Brocade Communications Systems WFT-2D User Manual

4. Enable HTTP redirection to HTTPS by selecting the Redirect HTTP Requests to HTTPS check
5. Enter a port number in the Starting Port # field.
6. Click Apply or OK to save your work.
7.

Support mode settings

You can configure support settings to allow enhanced diagnostics.
Configuring support mode settings
To configure support mode settings, complete the following steps.
1. Select Server > Options.
2. Select Support Mode in the Category list.
3. Select the Log client support data - Log Level list, and select the type of log data you want to
Brocade Network Advisor SAN User Manual
53-1003154-01
box.
When you enable HTTP redirection, the server uses port 80 to redirect HTTP requests to
HTTPS. Make sure that port 80 is available before you enable HTTP redirection.
The default is 24600.
For Professional, the server requires 15 consecutive free ports beginning with the starting port
number.
For Trial and Licensed versions, the server requires 18 consecutive free ports beginning with
the starting port number.
NOTE
Changes to this option take effect after application restart.
Click OK on the "changes take effect after application restart" message.
The Options dialog box displays
NOTE
Only use this option when directed to by customer support.
The Support Mode pane displays
FIGURE 47
Options dialog box (Support Mode pane)
configure.
Log level options include: All, Fatal, Error, Warn, Info, Debug, Trace, and Off. Default is Info.
(Figure 47).
(Figure 46).
Software Configuration
4
131