Fabric Watch Support In Access Gateway Mode - Brocade Communications Systems StoreFabric SN6500B Administrator's Manual
Brocade fabric watch administrator's guide v7.1.0 (53-1002752-01, march 2013)
Hide thumbs
Also See for StoreFabric SN6500B:
- User manual (1505 pages) ,
- Command reference manual (1168 pages) ,
- Reference (934 pages)
Table of Contents
Advertisement
1
Fabric Watch support in Access Gateway mode
Time bases specify the time interval between two samples to be compared. You can set the time
base to day (samples are compared once a day), hour (samples are compared once an hour), or
minute (samples are compared every minute). Second samples are not advisable. This
configurable field affects the comparison of sensor-based data with user-defined threshold values.
See
Fabric Watch support in Access Gateway mode
Both the Advanced Performance Monitoring (APM) license and the Fabric Watch license must be
installed on the platform configured in Access Gateway (AG) mode to use the frame monitoring and
end-to-end (EE) monitoring capabilities. The APM license provides the counters and the Fabric
Watch license provides the monitoring and alert mechanisms for these counters. See
high threshold of the RX area of an EE monitor"
The following classes are not supported in Access Gateway mode:
•
•
•
•
12
"Time bases"
on page 16 for more information.
Fabric
Security
E_Port (Port subclass)
VE_Port (Port subclass)
on page 48 for configuration information.
Fabric Watch Administrator's Guide
"Setting the
53-1002752-01
Advertisement
Table of Contents
