Creating A L2 Acl From A Saved Configuration; Deleting A L2 Acl Configuration From The Application - Brocade Communications Systems Brocade 8/12c User Manual

15
Layer 2 access control list management
Clearing L2 ACL assignments
To clear L2 ACL configuration from interfaces, complete the following steps.
1. Select Configure > Security > L2 ACL > Port.
2. Select a port or LAG in the Available Ports table and click the right arrow button.
3. Click OK.
4. Select the Clear ACL Assignment option.
5. Click OK on the Device_Name - Port_Number/LAG LAG_Number - Layer 2 ACL Configuration

Creating a L2 ACL from a saved configuration

To create a L2 ACL from a saved configuration, complete the following steps.
1. Select the device and select Configure > Security > L2 ACL > Product.
2. Select From Saved Configurations from the Add list.
3. Select one or more configurations to add to the new L2 ACL configuration.
4. Click OK on the L2 ACL Saved Configurations dialog box.
5. Click OK on the Device_Name - L2 ACL Configuration dialog box.

Deleting a L2 ACL configuration from the application

To delete a L2 ACL configuration from the application, complete the following steps.
1. Select the device and select Configure > Security > L2 ACL > Product.
2. Select the L2 ACL you want to delete in the ACLs table and click Delete.
398
The Port Selection - L2 ACL dialog box displays.
LAGs display in the Available Ports table using the following convention: Po LAG_Number.
The Device_Name - Port_Number/LAG LAG_Number - Layer 2 ACL Configuration dialog box
displays.
dialog box.
The Deploy to Ports - L2 ACL dialog box displays. To deploy the configuration, refer to
configuration deployment"
The Device_Name - L2 ACL Configuration dialog box displays.
The L2 ACL Saved Configurations dialog box displays.
The new ACL displays in the ACLs table.
The Deploy to Products - L2 ACL dialog box displays. To save the configuration, refer to
a security configuration deployment"
The Device_Name - L2 ACL Configuration dialog box displays.
This deletes the L2 ACL configuration from the application.
on page 400.
on page 402
Brocade Network Advisor SAN User Manual
53-1002167-01
"Security
"Saving