Brocade Communications Systems Brocade 8/12c User Manual page 787

4. Enter the following information:
5. Click the right arrow button to add the IP address to the list. If additional IP addresses are
6. Click OK to begin the deployment of the address to the product.
The Deploy IP Configuration dialog box displays.
7.
8. Enter a name in the Name field that will be used to identify the configured VLAN.
9. Enter a description in the Description field that will be used to identify the configured VLAN.
10. Click OK to deploy the IP address.
Brocade Network Advisor SAN User Manual
53-1002167-01
•
Primary or Secondary options (DCB products only)—Indicates whether the IP address is the
primary or secondary IP address of the VLAN.
•
Type—Select the type of IP address you want to assign to the VLAN. Choose CIDR or
IP/Subnet.
•
Enter the IP address in the fields provided:
If you chose the CIDR Subnet format, enter a subnet address in the

subnet_address/subnet_mask_bits format (for example, 192.168.2.10/24).
If you chose the Subnet format, enter a subnet address in the

subnet_address/subnet_mask format (for example, 192.168.2.10/255.255.255.0).
needed, continue adding them to the switch virtual interface. You can assign a maximum of
255 IP addresses on DCB products and a maximum of 24 IP addresses on IOS products
FIGURE 342
Deploy IP Configuration dialog box
Select a Save Configurations option:
•
Click the Save to running option to save the configuration while the system is running.
•
Click the Save to running and startup option to save the save the configuration both while
the system is running and when the system starts up.
•
Click the Save to running and startup then reboot option to save the configuration both
while the system is running and when the system starts up, and then the system
automatically reboots.
24
VLAN Routing
743