Vlan Manager; In This Chapter; Default Vlan; Super Aggregated Vlan - Brocade Communications Systems Brocade 8/12c User Manual

Brocade network advisor san user manual v11.1x (53-1002167-01, may 2011)
Hide thumbs Also See for Brocade 8/12c:
Table of Contents

Advertisement

VLAN Management

In this chapter

VLAN Manager

VLAN Manager allows you to manage Virtual Local Area Networks (VLANs) on Brocade products.
You can use VLAN Manager to configure port VLANs. By default, interfaces on a Brocade device
that are not assigned to a VLAN are members of the default port VLAN; therefore, all device
interfaces assigned to the default VLAN constitute a single Layer 2 broadcast domain.
When you assign an interface to a port VLAN, that interface is automatically removed from VLAN 1.
Interfaces assigned to port VLANs can be defined as untagged, tagged, and converged ports. An
untagged port can be a member of only one VLAN, while a tagged port can be a member of more
than one VLAN. Interfaces defined as converged allow tagged and untagged traffic to pass through
an interface at the same time.

Default VLAN

When you enable port-based VLANs, all ports in the system are added to the default VLAN. By
default, the default VLAN ID is 1. The default VLAN is configurable. If you want to use the VLAN ID
"VLAN 1" as a configurable VLAN, you can assign a different VLAN ID to the default VLAN.
You must specify a valid VLAN ID that is not already in use. For example, if you have already defined
VLAN 10, do not try to use "10" as the new VLAN ID for the default VLAN. Valid VLAN IDs are 1
through 4095.
NOTE
Default VLANs are not configurable on Data Center Bridging (DCB) products.

Super Aggregated VLAN

A super aggregated VLAN allows multiple VLANs to be placed within another VLAN. This feature
allows you to construct Layer 2 paths and channels. It is useful for Virtual Private Network (VPN)
applications in which you need to provide a private, dedicated, Ethernet connection for an
individual client who can transparently reach its subnet across multiple networks.
Brocade Network Advisor SAN User Manual
53-1002167-01
VLAN Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 725
Port VLANs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 729
STP or RSTP configuration on a port VLAN . . . . . . . . . . . . . . . . . . . . . . . . . 736
Chapter
24
725

Advertisement

Table of Contents
loading

This manual is also suitable for:

Network advisor 11.1.xBrocade bladesystem 4/24

Table of Contents