6. Click Apply or OK to save your work.
7.
Support mode
You can configure support settings to allow enhanced diagnostics.
Configuring support mode settings
To configure support mode settings, complete the following steps.
1. Select Server > Options.
FIGURE 46
2. Select Support Mode in the Category list to enable or disable support modes.
DCFM Enterprise User Manual
53-1001775-01
NOTE
Changes to this option take effect after application restart.
Click OK on the "changes take effect after application restart" message.
The Options dialog box displays
Options dialog box (Support Mode option)
NOTE
Only use this option when directed to by customer support.
(Figure
46).
3
Support mode
101