Enabling A Dcb Port Or Lag; Deleting A Lag - Brocade Communications Systems Brocade 8/12c User Manual

Enabling a DCB port or LAG

If you select multiple switches or multiple ports and LAGs from two or more switches, both the
Enable button and the Disable button are disabled.
1. Select Configure > DCB from the menu bar.
2. Select one or more DCB ports or LAGs (which can span multiple switches) that you want to
3. Click Enable.
4. Click Start on the Confirmation and Status dialog box to save the changes to the selected ports
5. Click Close to close the Confirmation and Status dialog box.

Deleting a LAG

You can only delete a link aggregation group (LAG) that is selected from a single switch. If you select
multiple switches or multiple ports from two or more switches, the Delete button is disabled.
1. Select Configure > DCB from the menu bar.
2. Select one or more LAGs (that can span multiple switches) that you want to delete from the
3. Click Delete.
4. Click Start on the Confirmation and Status dialog box to save the changes to the DCB switches.
5. Click Close to close the Confirmation and Status dialog box.
Brocade Network Advisor SAN User Manual
53-1002167-01
The DCB Configuration dialog box displays, showing the status of all DCB-related hardware and
functions.
enable.
NOTE
All selected LAGs must be in the same state (enabled or disabled); otherwise, both the Enable
and Disable buttons are disabled.
The Confirmation and Status dialog box launches with the selected Ports or LAGs.
or LAGs.
The selected DCB ports or LAGs are enabled in the DCB Configuration dialog box.
The DCB Configuration dialog box displays, showing the status of all DCB-related hardware and
functions.
Products/Ports table.
The Confirmation and Status dialog box launches with the selected LAGs.
The selected LAGs are deleted in the DCB Configuration dialog box.
14
Switch policies
351