Removing Thresholds From The Thresholds Table - Brocade Communications Systems Brocade 8/12c User Manual

22
Removing thresholds
5. Click OK on the Port Fencing dialog box.

Removing thresholds from the thresholds table

To remove thresholds from all Fabrics, Switches, and Switch Ports as well as the Threshold table,
complete the following steps.
1. Select Monitor > Fabric Watch > Port Fencing.
2. Select a threshold type from the Violation Type list.
3. Select the threshold you want to remove in the Thresholds table.
4. Click Delete.
5. Click OK on the Port Fencing dialog box.
704
A directly assigned icon ( ) displays next to each object with an assigned threshold which
does not inherit a threshold from higher in the tree.
NOTE
If you remove a threshold from All Fabrics, it removes the threshold from individual Fabrics,
switches, and switch ports in all Fabrics except for a Chassis group. You must remove repeat
the procedure for the Chassis group.
The Port Fencing dialog box displays.
A removed icon ( ) displays next to the selected threshold in the Thresholds table when you
click Delete.
Brocade Network Advisor IP User Manual
53-1002168-01