Enabling Fcip Tunnels; Deleting Fcip Tunnels; Disabling Fcip Circuits; Enabling Fcip Circuits - Brocade Communications Systems Brocade 8/12c User Manual

Enabling FCIP tunnels

1. From the FCIP Tunnels dialog box, select the tunnel you want to enable.
2. Select Enable.
3. Click OK to enable the tunnel.

Deleting FCIP tunnels

1. From the FCIP Tunnels dialog box, select the tunnel you want to delete.
2. Select the Delete.
3. Click OK to delete the tunnel.

Disabling FCIP circuits

1. From the FCIP Tunnels dialog box, select the tunnel that contains the circuit.
2. Select Edit.
3. Select the circuit that you want to disable from the Circuit properties table at the bottom of the
4. Select Disable.
5. For tunnels with multiple circuits, select additional circuits from the table to disable and select
6. Click OK to disable the circuit(s).

Enabling FCIP circuits

1. From the FCIP Tunnels dialog box, select the tunnel that contains the circuit.
2. Select Edit.
3. Select the circuit that you want to disable from the Circuit properties table at the bottom of the
4. Select Enable.
5. For tunnels with multiple circuits, select additional circuits from the table to enable and select
Document Title
xx-xxxxxxx-01
A confirmation dialog box displays, warning you of the consequences of deleting a tunnel.
The Edit FCIP Tunnel dialog box displays.
dialog box.
Disable after each selection.
The Edit FCIP Tunnel dialog box displays.
dialog box.
Enable after each selection.
Enabling FCIP tunnels
20
665