Brocade Communications Systems Brocade 8/12c User Manual page 786

24
VLAN Routing
3. Complete one of the following steps:
742
The Virtual Port - IP Configuration dialog box displays, as shown in
have been configured for the switch virtual interface, they are listed in the Selected IP
Addresses list in the dialog box.
FIGURE 341
Virtual Port - IP Configuration dialog box
•
To add a new IP address to the switch virtual interface, enter the IP address in the IP
Address field and click the right arrow button to move it to the Selected IP Addresses list.
•
To modify an IP address of a switch virtual interface, select the IP address from the list and
click the left arrow button to move the IP address back to the IP Parameters list. Since this
list is for a single IP address, multiple IP addresses cannot be edited.
•
To delete an IP address, select the IP address from the list and click the left arrow button.
Figure 341. If IP addresses
Brocade Network Advisor SAN User Manual
53-1002167-01