Brocade Communications Systems Brocade 8/12c User Manual page 325

TABLE 21
Field
Selected Connection Properties table
Brocade Network Advisor SAN User Manual
53-1002167-01
Port connection properties (Continued)
2-WWPN
2-MAC Address
2-IP Address
2-Trunk
2-Speed (Gbps)
2-Tunnel ID
2-Circuit ID
Area ID (hex)/Port Index (hex)
Blocked
Buffers Allocated
Buffers Desired
Circuits
Connected Switch
Cost
Distance Actual (km)
Distance Estimated (km)
ED TOV
Fabric
FC Address
FC Port #
FCIP Capable
Flag (FICON related)
GE Port #
InBand Management State
iSCSI Capable
L2 Mode
LAG ID
Locked Port Type
Long Distance Setting
MAC Address
Manufacturer
Manufacturer Plant
Description
The world wide port number of the second switch.
The MAC address of the second switch.
The IP address of the second switch.
Whether there is a trunk on the second switch.
The speed of the second switch.
The tunnel ID of the second switch.
The circuit ID of the second switch.
The connected device port information.
The area identifier, in hexadecimal, of the switch-to-product
connection.
The configuration of the switch (blocked or unblocked).
The number of buffers allocated.
The number of buffers required but not allocated.
The circuit number of the connected switch.
The name of the connected switch.
The cost of the ISL link.
The actual distance (in km) for -end port connectivity.
The estimated distance (in km) for -end port connectivity.
The Error Detect timeout value, in milliseconds, of the connected
switch. This variable is used to flag a potential error condition when
an unexpected response is not received.
The fabric name.
The Fibre Channel (FC) address of the switch.
The FC port number of the switch.
Whether the switch is FCIP capable or not.
Whether a FICON-related flag is on or off.
The GE port number of the switch.
Whether inband management is enabled or disabled.
Whether the switch is iSCSI capable or not.
Whether the switch is in L2 mode or not.
The LAG identifier.
The port type of the locked product.
Whether the connection is considered to be normal or longer
distance.
The MAC address of the switch.
The name of the manufacturer.
The name of the manufacturing plant.
10
Ports
281