Brocade Communications Systems Brocade 8/12c User Manual page 614

18
Viewing and editing group properties
The Security tab
the Security tab, select a group from the Encryption Center Devices table, then select Group >
Security from the menu task bar, or right-click a group and select Security. The Properties dialog
box displays with the Security tab selected.
NOTE
You can also select a group from the Encryption Center Devices table, then click the Properties icon.
FIGURE 273
NOTE
You must enable encryption engines before you back up or restore master keys.
Master key actions are as follows:
•
•
•
•
•
See
See
NOTE
Encryption is not allowed until the master key has been backed up.
570
(Figure 273) is viewed from the Encryption Group Properties dialog box. To access
Encryption Group Properties dialog box - Security tab
Create a new master key, which is enabled when no master key exists or the previous master
key has been backed up.
Back up a master key, which is enabled any time a master key exists.
Restore a master key, which is enabled when either no master key exists or the previous
master key has been backed up.
System Cards, which identifies if the use of a system card is required for controlling activation
of the encryption engine.
Authentication Cards, which identifies if one or more authentication cards must be read by a
card reader attached to a Management application PC to enable certain security-sensitive
operations.
"Master keys" on page 540 for complete information about managing master keys.
"Smart card usage" on page 431 for information about system cards and authentication cards.
Brocade Network Advisor SAN User Manual
53-1002167-01