Brocade Communications Systems Brocade 8/12c User Manual page 752

23
Configuring an Allow/Prohibit Matrix manually
3. Choose one of the following options:
4. Click Manual Allow/Prohibit.
5. Select one of the following options
6. Enter the port number of the first port for which you want to allow or prohibit communication in
7.
8. Click Add.
9. Repeat steps
10. Click OK on the Manual Allow/Prohibit dialog box.
11. When you have completed the matrix, click Save if you started with a new matrix, or Save As if
12. Click Analyze Zone Conflicts.
13. Click Close on the Configure Allow/Prohibit Matrix dialog box.
708
•
Double-click a configuration file.
•
Select a configuration file and click the right arrow.
A matrix displays. The switch ports are displayed on both the vertical axis and horizontal
axis. A green circle icon ( ) indicates communication is allowed between the ports.
The Manual Allow/Prohibit dialog box displays.
FIGURE 328
Manual Allow/Prohibit dialog box
•
Select Allow to allow communication between two specific ports.
•
Select Prohibit to prohibit communication between two specific ports.
the Port Address 1 field.
Enter the port number of the second port for which you want to allow or prohibit
communication in the Port Address 2 field.
The information displays in the Selected Ports for Modification table.
To delete any of these manual configurations, select the configuration you want to delete in the
Selected Ports for Modification table and click Remove.
step 5 through
you edited a copy of an existing matrix.
This operation can be done before or after a configuration is saved. This operation checks the
current zoning settings for conflicts with settings in the Allow/Prohibit Matrix. Zone conflict is
analyzed against the switch for port zoning only. The table cells display in the red background if
the two ports are not in the same zone in an active zone configuration.
step 8 for each Allow/Prohibit configuration.
Brocade Network Advisor IP User Manual
53-1002168-01