Removing A Frame Monitor From A Switch - Brocade Communications Systems Brocade 8/12c User Manual

8. Click Start.
9. Click Close after configuration is complete (indicated by "Completed" in the Progress column).

Removing a frame monitor from a switch

When you remove a frame monitor from a switch, the frame monitor is automatically removed from
all assigned ports in the switch.
You can remove only custom frame types; you cannot remove the pre-defined frame types.
1. Select Monitor > Fabric Watch > Frame Monitor.
2. Select the Switch option.
3. Expand the Products / Monitors list to display the frame monitors for each switch.
4. Select a frame monitor and click the left arrow button.
5. Click OK.
6. Click Start.
7.
Brocade Network Advisor IP User Manual
53-1002168-01
The frame monitor configuration is applied to the ports.
The Frame Monitor dialog box displays.
The Products / Monitors list displays the switches that support Frame Monitoring.
The frame monitor is removed from the switch and the Configure Monitor area is populated
with the values for that frame monitor.
The Frame Monitor Configuration Status dialog box displays.
The frame monitor configuration is applied to the switches and ports.
Click Close after configuration is complete (indicated by "Completed" in the Progress column).
Removing a frame monitor from a switch
28
821