Editing An E-Mail Call Home Center - Brocade Communications Systems Brocade 8/12c User Manual

6
Editing a call home center

Editing an E-mail call home center

E-mail call home centers are available for Brocade, IBM, and Oracle. To edit one of these call home
centers, complete the following steps.
1. Select Monitor > Event Notification > Call Home.
2. Select the call home center you want to edit (Brocade E-mail, IBM E-mail, or Oracle E-mail) in
3. Click Edit Centers (beneath the Call Home Centers table).
FIGURE 59
4. Make sure the call home center type you selected displays in the Call Home Centers list.
5. Select the Enable check box to enable this call home center.
6. Enter the customer contact name in the Customer Details - Name field.
7.
8. Enter the phone number of the customer contact in the Customer Details - Phone (Office) field.
9. Enter the mobile phone number of the customer contact in the Customer Details - Phone
10. Enter the name of the server in the SMTP Server Settings - Server Name field.
11. Select the SMTP over SSL check box to enable secure communication between the SMTP
12. Enter the port number (default is 465 if SMTP over SSL is enabled; otherwise, the default is
13. Enter a user name in the SMTP Server Settings - Username field.
164
The Call Home dialog box displays.
the Call Home Centers table.
The Configure Call Home Center dialog box displays
Configure Call Home Center dialog box (Brocade, IBM, or Oracle E-mail option)
Enter the company name in the Customer Details - Company field.
(Mobile) field.
server and the Management application.
25) of the server in the SMTP Server Settings - Port field.
This is a required field when the SMTP server authentication is enabled.
(Figure 59).
Brocade Network Advisor SAN User Manual
53-1002167-01